MX-5270

80W MX System w/ MX-PS5200, USF-1000

Description

The MX-5200 soldering, desoldering and rework series has increased power and process control, with dual-simultaneous ports. For two users or single user with dual applications. The MX-5200 can be operated with two handpieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed. Fast time-to-recovery. Delivers increased production rates and throughput no matter the application. The challenges of high mass components, multilayered boards and lead-free solders are seamlessly tackled by the MX-5200 super-charged power supply. SmartHeat® process control. The technology built-in every Metcal System means that soldering and rework are always performed at safe, controlled temperatures. Metcal users know that moderate fixed temperatures, where power is varied, provides the best assurance for a well-controlled soldering and rework process.

Specifications

Input Line Voltage:          100 - 240 VAC, grounded circuit, 50/60 Hz

Rated Power Consumption:       70 W max.

Output Power:       Variable, 40 W max.*

Output Frequency: 13.56 MHz

Heating Method:    Induction, smartHeatR

Connections:          Dual Port, switchable

Power Supply Dim. W x D x H: 121 x 121 x 220 mm (4.8" x 4.8" x 8.7")

Power Supply Weight:     2.65 kg (5.8 lb)

Certification / Marking:   cTUVus, CE

Tip-to- Ground Potential: < 2 mV

Tip-to-Ground Resistance:         < 2 Ohm

Ground Detection: Permanent

Surface Resistivity:          105 - 109 Ohm

Idle Temperature Stability:        1.1 °C ( 2 °F) in still air

Tip Temperature Accuracy:       Meets or exceeds IPC J-STD-001 Standard

Power Cord Length:        183 cm, 18/3 SJT

Warranty:    4 years

Ambient Operating Temp:         10 - 40 °C (50 - 104 °F)

Max. Enclosure Temp:    55 °C (131 °F)

Solder-Pen Specification  Solder-Pen

Hand-Piece Cable Length:         183 cm (72”), burn proof, ESD-safe

Hand-Piece - RF Connector:      F-type power connector

Desolder-Pen Specificaton:        MX-DS1

Hand-Piece Cable Length:         183 cm (72”), burn proof, ESD-safe

Hand-Piece - RF Connector:      F-type power connector

Air Hose:     ESD-save

Tweezer Specification:     MX-PTZ

Hand-Piece Cable Length:         183 cm (72”), burn proof, ESD-safe

Hand-Piece - RF Connector:      F-type power connector

Desolder Workstand:       MX-W5DS

Features and Benefits

A built in Net Power Meter which will display a graphical and numerical representation of the power applied to the cartridge.

User Programmable PowerSave Mode: the time to enter PowerSave Mode is adjustable from 10 to 120 minutes.

Ground Fault Interrupt: AC ground monitor detects power line ground failures and immediately alerts the operator and shuts down the system.

Universal Power Supply: automatically senses the input line voltage and adjusts accordingly, which allows for worldwide operation without adaptors or a change in performance.

Full compatibility with existing and previous MX upgrade kits, tip-cartridges, hand-pieces and accessories.

Product Comprise of

MX-PS5200 Power Supply

USF-1000 Solder feeder

MX-H7-SF Solder feeder Hand-Piece

USF-FTA-12 Feeder Tube Assembly

USF-GTA-12 Teflon Nozzle

AC-FS1 Footswitch and WS1Sleeper Stand

MX-CP1 Cartridge Removal Pad

Cartridges and Tips compatible with This Product

Cartridges/Tips

Additional Resources

MX-5200-Data-Sheet-English.pdf

MX-5200-User-Manual-Multi-Languages.pdf

MX-5200-Quick-Start-Guide.pdf

If you have any questions Contact Us.