MFR-1351
MFR Dual Port Solder/Desolder System, Internal Pump
Description
The MFR-1300 Series Desoldering and Rework Systems are standalone equipment. The power supply features an internal pump providing 0.7 bar pressure and 60 watts of SmartHeat®-Technology that makes through-hole desoldering easy and keeps your products safe from board damage. The new handpiece has been designed to be used in two configurations. As standard, the MFR-H5-DS desolder tool is a pencil grip design and a clip-on grip enables the handpiece to be used in a pistol style. The Solder collection chamber has a large capacity and the innovative replaceable tips enables reduced downtime and quicker changeover. Since the system has two switchable ports it can be used in addition with a soldering tip, cartridge or tweezers handpiece.
Specifications
Input Line Voltage: 100 - 240 VAC, grounded circuit, 50/60 Hz
Rated Power Consumption: 110 W max.
Output Power: Variable, 60 W max.*
Output Frequency: 450 KHz
Heating Method: Induction, smartHeatR
Connections: Switchable Dual Port
Power Supply Dim. W x D x H: 170 x 200 x 152.5 mm (6.7"" x 7.9"" x 6"")
Power Supply Weight: 3.9 kg (8.6 lb)
Certification / Marking: cTUVus, CE
Tip-to- Ground Potential: < 2 mV
Tip-to-Ground Resistance: < 2 Ohm
Ground Detection: Permanent
Surface Resistivity: 105 - 109 Ohm
Idle Temperature Stability: 1.1 °C ( 2 °F) in still air
Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard
Vacuum Suction Force: 0.7 bar (21"" Hg at Vacuum pump)
Noise Level: < 55 dB
Power Cord Length: 183 cm, 18/3 SJT
Warranty: 1 year
Ambient Operating Temp: 10 - 40 °C (50 - 104 °F)
Max. Enclosure Temp: 55 °C (131 °F)
Solder-Pen Specification Solder-Pen
Hand-Piece Cable Length: 122 cm (48”), burn proof, ESD-safe
Hand-Piece - RF Connector: 8-pin circular DIN
Desolder-Pen Specificaton MFR-H5-DS
Hand-Piece Cable Length: 152 cm (60”), burn proof, ESD-safe
Hand-piece - Connector: 8-pin circular DIN
Air Hose: ESD-save
* RF SmarHeat Technology provides greater power. More details at www.metcal.com/smartheat
Features and Benefits
SmartHeat® Technology provides exceptional power for high thermal demand applications
Single or Dual simultaneous outputs allow for single/dual hand-piece use
Five hand-pieces available for increased application solutions for soldering
Desoldering (upgrade kit MX-UK5) and rework on one system
Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility
Ergonomic handpieces for operator safety and comfort
Product Comprise of
MFR-PS1300 Soldering Station
MFR-H5-DS Hand-Piece
MFR-H1-SC2 Hand-Piece
MFR-WSDSU Workstand
WS1 Workstand
Cartridges and Tips compatible with This Product
Cartridges/Tips
Additional Resources
MFR-1300-Data-Sheet-160819.pdf
MFR-1300-Data-Sheet-French.pdf
MFR-1300-Data-Sheet-German.pdf
MFR-1300-user-manual-multi-language.pdf
MFR-1300-Maintenance-instructions-Updated.pdf
OK-International_Wartungsanleitung-Entlo-tpistole-fu-r_MFR-1350_MFR-1150.pdf
If you have any questions Contact Us.
