Metcal- Power Supply CV-PS500 (40W)
Description
Metcal innovation has led the industry for decades, beginning with SmartHeat technology that senses the thermal load and instantly delivers Power on demand to the solder joint. The embedded self-regulating heater delivers the right amount of Power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required.
The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge the quality of a solder joint by introducing an objective method of evaluating solder joint quality. This systemic and objective approach provides repeatability and a measureable standard to the soldering process.
Specifications
Input Line Voltage: 100 - 240 VAC, grounded circuit, 50/60 Hz
Rated Power Consumption: 85 W max.
Output Power: Variable, 40 W max.*
Output Frequency: 13.56 MHz
Heating Method: Induction, smartHeatR
Display: 2.8” Color TFT Touch Display
Display Resolution: 320*240 RGB
Display Size: 2.8” Diagonal
Display Active Area: 43.20 x 57.60 mm
Connections: Dual Port, switchable
Interface -Communication/Firmware Upgrade: Via USB port and appropriate software with compatible computer and cables.
Power Supply Dim. W x D x H: 121 x 121 x 220 mm (4.8" x 4.8" x 8.7")
Power Supply Weight: 2.65 kg (5.8 lb)
Certification / Marking: cTUVus, CE
Tip-to- Ground Potential: < 2 mV
Tip-to-Ground Resistance: < 2 Ohm
Ground Detection: Permanent
Surface Resistivity: 105 - 109 Ohm
Idle Temperature Stability: 1.1 °C ( 2 °F) in still air
Tip Temperature Accuracy: Meets or exceeds IPC J-STD-001 Standard
Power Cord Length: 183 cm, 18/3 SJT
Warranty: 5 years
Ambient Operating Temp: 10 - 40 °C (50 - 104 °F)
Max. Enclosure Temp: 55 °C (131 °F)
Features and Benefits
SmartHeat Power on Demand Technology
Patented Connection Validation IMC Formation Technology
2.8” color touchscreen with bold graphics
Communications Port for process traceability data and firmware graphics
Precise tip temperature display
Integrated Net Power Meter and Power graph
Patented Chip-in-Cartridge technology
Closed loop bi-directional communication
Stores and records Cartridge attributes
Provides traceability information
Protects Power supply from non-conforming Cartridges
Backwards compatible with MX series Power supplies
Password protection
Product Comprise of
CV-PS500 Power Supply
Cartridges and Tips compatible with This Product
Cartridges/Tips
Additional Resources
Connection-Validation-CV-Data-Sheet-6-Pager_Final.pdf
Metcal_CV-Cartridges-Catalogue_2018_US.pdf
CV-Manual.pdf
Metcal_CV-Cartridges-Catalogue_2018_US.pdf
If you have any questions Contact Us.
