DX-350
Programmable Digital Dispenser for Low to High Viscocity Medium, 0 - 6.9 bar (0-100 psi)

Description

The dosing system DX-350/DX-355 offers the possibility to save up to 10 dispensing profiles. Time, pressure and adjustable vacuum suck-back are displayed digitally. The device is intuitive to use and offers a high level of accuracy for line or point dispensing. An infinitely vacuum suck-back prevents low-viscosity media from dripping between the dosing cycles and high viscosiy media from pulling threads. The set value is displayed digitally. A RS-232 interface enables connection to a PLC. The system is delivered ready for operation. The dispensing system is available in two versions: Working pressure from 0 - 6.9 bar for common applications (DX-350). Working pressure adjustable via precision valve from 0 - 1 bar for low-viscosity media (DX-355).

PLEASE NOTE: The TSD800-6 Air Filter (not included) must be installed with the dispenser to ensure proper air filtration. Please remember to purchase a TSD800-6 Air Filter together with the dispenser.

Specifications

Input Voltage:        100 - 240 VAC, 50/60 Hz

Operating Pressure:         0 - 6.9 bar (0 - 100 psi)

Cycle Rate:  1200 cyle/minute

Timing Range:       0.008 - 60 seconds

Vacuum Suck-Back Control:     Steplessly variable

Timing Tolerances:          +/- 0.001 %

Cycle Mode:          TIMED, PURGE, INTERRUPT, TEACH

Dispensing DOT counter:          Yes

Memories:    10 programmable

I/O Interface:         Initiated by voltage or contact closure

Certification:          CE, TUV-GS, NRTL

Size (W x L x H):  152 x 165 x 1787 mm (6" x 6.5" x 7")

Weight:        1.2 kg ( 2.6 lb)

Warranty:    1 year

Features and Benefits

Small footprint and lightweight

10 programmable dispense routines and 4 operating modes

Digital timer, pressure and vacuum read-outs

Accurate reproduction of sequences of beads or dots

Adjustable vacuum suck back feature for controlling drips of fluid between dispense cycles

Available in two versions of operating pressure: 0 to 100 psi for general applications, and 0 to 15 psi for specific low viscosity applications

Packaged ready to use with: universal power supply, foot switch, air hose, sample tips, syringe barrels & adapter

/O Interface for robotic applications

Product Comprise of

Foot Switch

Power Supply

Sample Tip Kit

10cc Receiver Head Kit

Mounting Brackets

Receiver Head Air Hose Holder

Syringe Barrel Stand

Additional Resources

DX-350-Data-Sheet-2014.pdf

DX-350-user-manual-multi-language.pdf

DX-350-user-manual-Asia-1.pdf

If you have any questions Contact Us.